Technical Specification

Trofmoc Specification to AS1801
This specification is the testing basis for the design of the TROFMOC beanie and TROFMOC balaclava.

Retention system 3.3.1
-Improves the retention capability of the helmet by extending the harness area connection with the head
Cradle 3.3.2
-The thin connection flap material allows the helmet cradle to continue to conform to the head shape and provides additional comfort to wearer
Headband3.3.3
-The unique TROFMOC design allows the head band to be in continuous contact with the head shape
Helmet Accessories 3.4.1
-Helmet performance requirements a set out in 4.6 and 4.7 is uninhibited by the TROFMOC Helmet Accessory
Ear and Neck Protection 3.4.6
-Helmet performance requirements a set out in 4.6 and 4.7 is uninhibited by the TROFMOC Helmet Accessory
Vertical Clearance 3.5.1
-vertical clearance is unaffected by the TROFMOC Helmet Accessories
Wearing Height 3.5.2
-Wearing Height is unaffected by the TROFMOC Helmet Accessory
Ventilation Gap 3.6.1 – Passage of free air continues with the TROFMOC Helmet Accessory fitted

Trofmoc Specification to IS EN 397:2012
Vertical Clearance 4.4
-vertical clearance is unaffected by the TROFMOC Helmet Accessories
Wearing Height 4.6
-Wearing Height is unaffected by the TROFMOC Helmet Accessory
Ventilation Gap 4.9 – Passage of free air continues with the TROFMOC Helmet Accessory fitted
Helmet performance requirements as set out in 6.6 and 6.7 is uninhibited by the TROFMOC Helmet Accessory